- MMWX Apparel
- ISX Turbocharger Kits & Conversion Parts
- CAT Turbocharger Kits & Conversion Parts
- Power Up Packages
- Stock Replacement Turbos
- Performance Turbos
- Exhaust Manifolds
- Charge Air Coolers (CAC)
- Accessories
- Lighting
- DEALS!
-
BorgWarner | S410SX / S480 | 80MM / 1.32 AR CAT Turbo - IN STOCK
BorgWarner
$2,400.00This is a bolt on upgrade for 3406, C15, & C16 engines. Good for up to 750HP depending on supporting mods. This is a Non-Wastegated turbo with a small sized exhaust housing, allowing for quick spool up and tons of top end power...$2,400.00 -
Cummins ISX Turbo | HE451VE ISX15 | 2882111 - IN STOCK!
Momentum Worx
$2,800.00Aftermarket new replacement turbo for CM2250 & CM2350 Cummins ISX! This is a the 64MM variant for lower horsepower ISX engines, IE 4(430-500HP). While our turbo is a direct replacement, it does feature a billet compressor wheel and the most up...$2,800.00 -
S488 Billet Wheel Turbo | 88/96/1.32AR T6 Flange (S400 Frame)
Zeki
$1,650.00ASSEMBLED IN THE USA -88MM Billet Compressor Wheel -360 Degree Thrust Bearing -1.32 A/R T6 Exhaust Housing, Full Marmon V-Band Outlet (We have clamps and down pipe adapters available) -5.5" Turbo Inlet$1,650.00 -
Cat C15/3406 Exhaust Manifold Install Kit
Momentum Worx
$245.00 - $295.00Install kit for Single Turbo Cat C15/3406 Engines. Includes new manifold studs, nuts, spacers, washers, and gaskets + turbo studs, nuts, and gaskets. A must have when replacing your exhaust manifold!$245.00 - $295.00 -
Momentum Worx | CAT S410SX / S480 | 80MM / 1.45 A/R Turbo - IN STOCK!
Momentum Worx
$2,200.00Assembled and balanced in the US. This is our own billet 80MM supercore with a 1.45 exhaust housing. This turbo will require large injectors and/or marine cam for best results. Easily one of the most popular turbo upgrades for CAT guys looking to...$2,200.00 -
C15 Acert Single Turbo Installation Kit
$895.00Installation kit for installing single turbo on your C15 Acert. Kit Includes: -Oil Feed Line -Oil Feed Line Mounting Bolts -Oil Drain Line -Oil Drain Line Mounting Bolts -Oil Drain Line Block Receiver & O-Ring -Secondary...$895.00 -
C15 Acert Single Turbo Conversion Oil Line Kit
Momentum Worx
$595.00Turbo oil line kit for converting your C15 Acert to Single Turbo Kit Includes: -Oil Feed Line -Oil Feed Line Mounting Bolts -Oil Drain Line -Oil Drain Line Mounting Bolts -Oil Drain Line Block Receiver & O-Ring -Secondary Oil Drain...$595.00 -
BorgWarner S400 | Cummins ISM, ISME, M11 Turbocharger | 178923
BorgWarner
$1,200.00Brand new, no core! Fits Cummins M11, Cummins ISM, and Cummins ISME engines. Cross...$1,200.00 -
S475 Turbo | Assembled in the USA | 171702 Replacement
Momentum Worx
$825.00ASSEMBLED IN THE USA -7+7 75MM Compressor Wheel. -1.32 A/R T6 Exhaust Housing, Full Marmon V-Band Outlet (We have clamps and down pipe adapters available) -5" Turbo Inlet Replacement...$825.00 -
Momentum Worx Billet S475 Turbo | 11 Blade Wheel | 75/1.32
Momentum Worx
$1,099.00The Momentum Work Billet 11 Blade is one of our longest standing models. Built on the rugged S400 frame, the billet 11 full blade wheel and 360 degree thrust bearing are the things that set this turbo apart from a standard S475 turbo...$1,099.00 -
SDP C15 Acert High Pressure Turbo CHRA | GTA4294BRS
Garrett
$1,475.00New genuine Garrett BALL BEARING CHRA / Cartridge for Cat C15 Acert with SDP engine prefix. Cross...$1,475.00 -
SDP C15 Acert Low Pressure Turbo CHRA | GTA5518BR
Garrett
$3,480.00New genuine Garrett BALL BEARING CHRA / Cartridge for Cat C15 Acert with SDP engine prefix. Cross...$3,480.00 -
Cat C13 Acert Low Pressure Turbo | GTA4702
Zeki
$1,150.00Directly replacement low pressure turbocharger for all KCB Caterpillar C13 Acert engines. This turbo is brand new, no core required. Assembled and balanced in the USA! Interchange Part...$1,150.00 -
Cat C13 Acert High Pressure Turbo | GTA4088
Zeki
$1,450.00Directly replacement high pressure turbocharger for all KCB Caterpillar C13 Acert engines. This turbo is brand new, no core required. Assembled and balanced in the USA! Interchange Part...$1,450.00 -
Mitsubishi TE06H Turbo for Isuzu 6HK1 7.8L
Garrett
$1,985.00New genuine Mitsubishi turbocharger for Isuzu 6HK1 7.8L. Crosses: 97602220 4918501560 49185-01560 97602223 8976022201 8-97602-220-1 1700410197 8976022231 8-97602-223-1 4918501550 49185-01550$1,985.00 -
Garret GT25 Turbo for Isuzu 4HE1 4.8L | 99-04 NQR and NPI
Garrett
$950.00New genuine Garrett turbocharger for Isuzu 4HE1 4.8L, 99-04 NQR, NPI. Crosses: ...$950.00 -
Garrett GT2560 Turbo for Isuzu 4HK 5.2L | 04-07 NPR, NQR, NRR
Garrett
$1,190.00New genuine Garrett turbocharger for Isuzu 4HK1 5.2L, 04-07 NPR, NQR, NRR powered trucks. The Isuzu N-Series trucks are known as reliable work horses! The 4HK1-TC had a fairly long production run from 2005 through 2020. With a truck...$1,190.00 -
BorgWarner B3G Turbocharger for Mercedes OM471LA Freightliner, Fuso, Mercedes
BorgWarner
Brand new genuine BorgWarner turbocharger for Mercedes OM471LA powered freightliner trucks. Crosses: 4710963599 4710967599 1387 972 0084 1387 972 0076 4710963699 4710967099 1387 970 0084 1387 970... -
BorgWarner B3G Turbocharger for Mercedes OM471LA Freightliner
BorgWarner
$1,850.00Brand new genuine BorgWarner turbocharger for Mercedes OM471LA powered freightliner trucks. Interchange: 4710964399 4710966699 1387 971 0087 4710964599 4710967899 1387 971 0108 4710964499 4710967999 1387 970...$1,850.00 -
*MOMENTUM WORX | CAT Exhaust Manifold and Turbocharger Power Up Package (PUP)
Momentum Worx
$3,600.00 - $4,500.00Let's face it, first off - even the newest Caterpillar 14.6L and 15.2L engines are getting long in the tooth! Even if you are not looking to upgrade your CAT 3406E or CAT C15, its likely in desperate need of a new manifold and turbocharger, so why...$3,600.00 - $4,500.00 -
Holset HE531VE Detroit Series 60 14.0L Turbo | 23539570
Holset
$2,800.00Holset HE531VE Turbo and Actuator for your Series 60 Detroit Diesel! Professional remanufactured. DDEC 6 Detroit 14l Engine fitment. If you have any questions at all - please feel free to call us at 215-237-9672 or email us at...$2,800.00 -
FULL TILT | ISX CM2250/ CM2350 Ceramic Coated Exhaust Manifold
Full Tilt Performance
$1,975.00NOTE: Check the right end of your factory manifold for casting number. This manifold is for "5999" casting number. Full Tilt Performance manifolds have been designed to improve on all aspects over the manufacturers. All of our...$1,975.00 -
FULL TILT | ISC / PX8 Ceramic Coated Exhaust Manifold
Full Tilt Performance
$1,975.00Full Tilt Performance manifolds have been designed to improve on all aspects over the manufacturers. All of our manifolds are cast out of a proprietary high quality blended steel, one of the hardest and most heat tolerant metals available today. Thicker...$1,975.00 -
FULL TILT | ISX CM870 Ceramic Coated Exhaust Manifold
Full Tilt Performance
$1,975.00Full Tilt Performance manifolds have been designed to improve on all aspects over the manufacturers. All of our manifolds are cast out of a proprietary high quality blended steel, one of the hardest and most heat tolerant metals available today. Thicker...$1,975.00 -
FULL TILT | ISX CM871 Ceramic Coated Exhaust Manifold
Full Tilt Performance
$1,975.00Full Tilt Performance manifolds have been designed to improve on all aspects over the manufacturers. All of our manifolds are cast out of a proprietary high quality blended steel, one of the hardest and most heat tolerant metals available today. Thicker...$1,975.00 -
FULL TILT | ISX Signature 600 HX60/HX55 Ceramic Coated Exhaust Manifold
Full Tilt Performance
$1,975.00Full Tilt Performance manifolds have been designed to improve on all aspects over the manufacturers. All of our manifolds are cast out of a proprietary high quality blended steel, one of the hardest and most heat tolerant metals available today. Thicker...$1,975.00 -
Full Tilt | Cummins ISX T6 Turbo Mount Ceramic Coated Exhaust Manifold
Full Tilt Performance
$2,340.00Includes oil feed and drain lines, manifold bolts, turbo mounting studs, and gaskets. Full Tilt Performance manifolds have been designed to improve on all aspects over the manufacturers. All of our manifolds are cast out of a proprietary high quality...$2,340.00 -
FULL TILT | Detroit 14L Pre-EGR Low Mount Ceramic Coated Exhaust Manifold
Full Tilt Performance
$1,975.00Full Tilt Performance manifolds have been designed to improve on all aspects over the manufacturers. All of our manifolds are cast out of a proprietary high quality blended steel, one of the hardest and most heat tolerant metals available today. Thicker...$1,975.00 -
FULL TILT | Detroit 14L Pre-EGR High Mount Ceramic Coated Exhaust Manifold
Full Tilt Performance
$1,975.00Full Tilt Performance manifolds have been designed to improve on all aspects over the manufacturers. All of our manifolds are cast out of a proprietary high quality blended steel, one of the hardest and most heat tolerant metals available today. Thicker...$1,975.00 -
FULL TILT | Detroit 14L Pre-EGR Ceramic Coated S-Shape Exhaust Manifold
Full Tilt Performance
$1,975.00Full Tilt Performance manifolds have been designed to improve on all aspects over the manufacturers. All of our manifolds are cast out of a proprietary high quality blended steel, one of the hardest and most heat tolerant metals available today. Thicker...$1,975.00 -
FULL TILT | Detroit 14L EGR Ceramic Coated Exhaust Manifold
Full Tilt Performance
$1,975.00Full Tilt Performance manifolds have been designed to improve on all aspects over the manufacturers. All of our manifolds are cast out of a proprietary high quality blended steel, one of the hardest and most heat tolerant metals available today. Thicker...$1,975.00 -
FULL TILT | Paccar MX13 Ceramic Coated Exhaust Manifold
Full Tilt Performance
$1,975.00Full Tilt Performance manifolds have been designed to improve on all aspects over the manufacturers. All of our manifolds are cast out of a proprietary high quality blended steel, one of the hardest and most heat tolerant metals available today. Thicker...$1,975.00 -
FULL TILT | CAT C15 Acert (Mid-Mount) Ceramic Coated Exhaust Manifold (Short Nose Trucks)
Full Tilt Performance
$1,975.00Full Tilt Performance manifolds have been designed to improve on all aspects over the manufacturers. All of our manifolds are cast out of a proprietary high quality blended steel, one of the hardest and most heat tolerant metals available today. Thicker...$1,975.00 -
FULL TILT | CAT E-Model Cab Over Ceramic Coated Exhaust Manifold
Full Tilt Performance
$1,975.00Full Tilt Performance manifolds have been designed to improve on all aspects over the manufacturers. All of our manifolds are cast out of a proprietary high quality blended steel, one of the hardest and most heat tolerant metals available today. Thicker...$1,975.00 -
FULL TILT | CAT C13 Single Turbo Ceramic Coated Exhaust Manifold
Full Tilt Performance
$1,975.00Full Tilt Performance manifolds have been designed to improve on all aspects over the manufacturers. All of our manifolds are cast out of a proprietary high quality blended steels, one of the hardest and most heat tolerant metals available today...$1,975.00 -
FULL TILT | CAT C12 Ceramic Coated Exhaust Manifold
Full Tilt Performance
$1,975.00Full Tilt Performance manifolds have been designed to improve on all aspects over the manufacturers. All of our manifolds are cast out of a proprietary high quality blended steel, one of the hardest and most heat tolerant metals available today. Thicker...$1,975.00 -
FULL TILT | CAT C13 Acert Ceramic Coated Exhaust Manifold
Full Tilt Performance
$1,975.00Full Tilt Performance manifolds have been designed to improve on all aspects over the manufacturers. All of our manifolds are cast out of a proprietary high quality blended steel, one of the hardest and most heat tolerant metals available today. Thicker...$1,975.00 -
FULL TILT | CAT C15 / 3406 Ceramic Coated Exhaust Manifold (Freightliner, Western Star, & Volvo Trucks, Kenworth T2000)
Full Tilt Performance
$1,975.00Full Tilt Performance manifolds have been designed to improve on all aspects over the manufacturers. All of our manifolds are cast out of a proprietary high quality blended steel, one of the hardest and most heat tolerant metals available today. Thicker...$1,975.00 -
FULL TILT | CAT C15 / 3406 Ceramic Coated Exhaust Manifold (Peterbilt & Kenworth)
Full Tilt Performance
$1,975.00Full Tilt Performance manifolds have been designed to improve on all aspects over the manufacturers. All of our manifolds are cast out of a proprietary high quality blended steel, one of the hardest and most heat tolerant metals available today. Thicker...$1,975.00 -
FULL TILT | CAT C15 Acert Ceramic Coated Exhaust Manifold
Full Tilt Performance
$1,975.00Full Tilt Performance manifolds have been designed to improve on all aspects over the manufacturers. All of our manifolds are cast out of a proprietary high quality blended steel, one of the hardest and most heat tolerant metals available today. Thicker...$1,975.00