S410SX
The S410SX series was created specifically for the heavy duty diesel crowd. BorgWarner originally designed the S410 & S410G turbochargers to act as replacements for the Garrett GT47 turbos on aging caterpillar 3406 and C15 engines. BorgWarner quickly noticed that customers were wanting more performance from their turbos, and began offer them with the upgraded bearing, compressor wheels, and exhaust housing options, thus the S410SX turbo upgrade was born!
The major benefit of the S410SX over the S400SX is bearing spacing. The wider journal bearing promotes strength in the rotating assembly over a more narrow bearing spacing. BorgWarner also elongated the bearing housing so that this turbos would be a direct fit with all factory lines on a single turbo caterpillar.
-
On Sale
BorgWarner S410SX | Big Cat Upgrade | 78/1.32 Turbo / 14969880000 - IN STOCK!!
BorgWarner
Now: $2,000.00Was: $2,400.00// Easily the MOST POPULAR bolt on upgrade for Caterpillar 3406 and C15 engines. This is great upgrade for a stock engine, or lightly upgraded engine with a file/tune. If you are going to throw larger injectors or a cam in this...Now: $2,000.00Was: $2,400.00 -
On Sale
BorgWarner S410SX | CAT C15 Turbo - 80MM / 1.58 Non Gated - IN STOCK!
BorgWarner
Now: $2,000.00Was: $2,400.00This is a bolt on upgrade for 3406, C15, & C16 engines with supporting modification. Have a set of larger injectors and/or marine cam? This is likely the turbo for you! Good for roughly 750HP depending on supporting mods. ...Now: $2,000.00Was: $2,400.00 -
S410SX Cat Turbo | 78MM & 1.32 A/R - ASSEMBLED IN THE USA - IN STOCK!
Momentum Worx
$2,000.00This is our most popular bolt on upgrade for Caterpillar 3406E and Caterpillar C15 Engines. (6NZ, 5EK, 1LW, etc) Good for roughly 600HP depending on supporting mods. This is a Non-Wastegated turbo with a small exhaust housing for...$2,000.00 -
On Sale
Momentum Worx | Cat S410SX / S480 | 80MM / 1.45 A/R - IN STOCK!
Momentum Worx
Now: $1,800.00Was: $2,200.00Assembled and balanced in the US. This is our own billet 80MM supercore with a 1.45 exhaust housing. This turbo will require large injectors and/or marine cam for best results. This is a bolt on upgrade for 3406, C15, & C16 engines...Now: $1,800.00Was: $2,200.00 -
BorgWarner S410SX / S480 | 80MM / 1.45 A/R | Big Cat Upgrade - IN STOCK!
Momentum Worx
$2,600.00This is a bolt on upgrade for 3406, C15, & C16 engines. Good for up to 800HP depending on supporting mods. This is a Non-Wastegated turbo with a medium sized exhaust housing, allowing for the best of both worlds when it comes to faster...$2,600.00 -
BorgWarner | S410SX 78MM /1.45 AR Cat Turbo - IN STOCK!!
BorgWarner
$2,600.00This is a bolt on upgrade for 3406, C15, & C16 engines. Good for roughly 650HP depending on supporting mods. This is a great turbo for those experiencing high drive pressures with a standard 78MM turbo. The larger 1.45...$2,600.00 -
On Sale
BorgWarner S410SX | V-Band Style Detroit/Cummins 78/1.32 Turbo - IN STOCK!
BorgWarner
Now: $2,200.00Was: $2,600.00Identical to the extremely popular 14969880000 Cat turbo, but with a Race Style compressor cover with v-band style outlet for universal fitment. Commonly used on Detroit Series 60 and Cummins ISX for BIG POWER builds. The S410SX...Now: $2,200.00Was: $2,600.00 -
Momentum Worx | Cat S410SX | 78MM / 1.45 A/R - IN STOCK!
Momentum Worx
$2,200.00This is a bolt on upgrade for 3406, C15, & C16 engines. Good for roughly 650HP depending on supporting mods. This is a great turbo for those experiencing high drive pressures with a standard 78MM turbo. The larger 1.45...$2,200.00 -
Momentum Worx S410SX 78MM/1.32 AR Turbo (V-Band Outlet) | ASSEMBLED IN THE U.S.A. - IN STOCK!
Momentum Worx
$2,000.00Good for roughly 600HP depending on supporting mods. This is a Non-Wastegated turbo with a small exhaust housing for faster spool up - allowing the truck to get into the power band much quicker. Will fit Detroits, and other T6...$2,000.00 -
BorgWarner S410SX 80MM/1.58AR V-Band Outlet Turbo | 14969880005 - IN STOCK!!
BorgWarner
$2,600.00Good for roughly 750HP depending on supporting mods. Features: Forged Milled compressor 360 degree thrust bearing. Dimensions: Comp. Wheel: 110MM Inducer: 80MM Turbine Wheel: 96MM A/R: 1.58$2,600.00 -
BorgWarner | S410SX / S480 | 80MM / 1.32 AR CAT Turbo - IN STOCK
BorgWarner
$2,400.00This is a bolt on upgrade for 3406, C15, & C16 engines. Good for up to 750HP depending on supporting mods. This is a Non-Wastegated turbo with a small sized exhaust housing, allowing for quick spool up and tons of top end power...$2,400.00 -
BorgWarner S410SX | CAT C15 Turbo - 82MM / 1.65 Wastegated - IN STOCK!
BorgWarner
$2,400.00This is a bolt on upgrade for 3406, C15, & C16 engines. The is the LARGEST S410SX turbo size produced. Not for the faint of heart, you will need some serious fuel to make this turbo work. If you put this turbo on a stock-ish motor,...$2,400.00 -
Momentum Worx S410SX Cat Turbo | 78MM / 1.32 A/R Wastegated
Momentum Worx
$2,000.00We took our most popular bolt on upgrade for Caterpillar 3406E and Caterpillar C15 Engines. (6NZ, 5EK, 1LW, etc), and added wastegate :) This turbo serves a few potential customers: 1) The customer running slightly too much power for a...$2,000.00 -
BorgWarner | S410SX / S482 | 82MM / 1.45 AR Cat Turbo - IN STOCK
BorgWarner
$2,600.00This is a bolt on upgrade for 3406, C15, & C16 engines. Good for roughly 850HP depending on supporting mods. This is the largest direct replacement turbo available, but has been modified with a quick spooling 1.45 A/R BorgWarner...$2,600.00 -
BorgWarner S410SX / S482 | 82MM / 1.58 AR Cat Turbo - IN STOCK
BorgWarner
$2,400.00This is a bolt on upgrade for 3406, C15, & C16 engines. Good for roughly 800HP depending on supporting mods. This is the largest direct replacement turbo available, but has been modified with a medium sized BorgWarner exhaust...$2,400.00 -
BorgWarner S410SX | CAT C15 Turbo - 80MM / 1.65 Wastegated - IN STOCK!
BorgWarner
$2,400.00This is a bolt on upgrade for 3406, C15, & C16 engines. Best for C16 because of the large gated exhaust housing. The 1.65 can be lazy if you don't have enough fuel and/or displacement to get it lit and keep it moving...$2,400.00 -
BorgWarner | S410SX Turbo 80MM Super Core | Caterpillar C15, 3406, 6NZ, 5EK, MBN - IN STOCK!!
BorgWarner
$2,200.00This is a turbo designated for usage on Single Turbo Caterpillar engines - C15 Acert, C15, 3406, MBN, 6NZ, 5EK, SDP, MXS, BXS, NSX Good for roughly 800HP depending on supporting mods. NO TURBINE HOUSING INCLUDED, but housing are...$2,200.00 -
BorgWarner | S410SX Turbo 82MM Super Core | Caterpillar C15, 3406, 6NZ, 5EK, MBN
BorgWarner
$2,200.00This is a turbo designated for usage on Single Turbo Caterpillar engines - C15 Acert, C15, 3406, MBN, 6NZ, 5EK, SDP, MXS, BXS, NSX Good for roughly 900HP depending on supporting mods. NO TURBINE HOUSING INCLUDED, but housing are...$2,200.00 -
BorgWarner | S410SX Turbo 78MM Super Core V-Band Outlet - IN STOCK!
BorgWarner
$2,200.00BorgWarner S410SX Supercore. This is a race style v-band outlet compressor cover. Fitment for converted cat, detroit, and ISX. Features: Forged Milled compressor 360 degree thrust bearing. Dimensions: Comp. Wheel:...$2,200.00 -
BorgWarner | S410SX Turbo 80MM Super Core - V Band Outlet
BorgWarner
$2,200.00This is a turbo designated for usage on ISX engines without variable geometry turbos. Good for roughly 750HP depending on supporting mods. NO HOUSING INCLUDED, but housing are available - please contact us or add them to your cart before...$2,200.00 -
Momentum Worx | S410SX Turbo 78MM Super Core V-Band Outlet - IN STOCK!
Momentum Worx
$1,800.00Momentum Worx S410SX Supercore. This is a race style v-band outlet compressor cover. Fitment for converted cat, detroit, and ISX. Must be used with 96MM turbine wheel housing. Features: Billet Compressor Wheel 360 degree...$1,800.00 -
BorgWarner S410SX | V-Band Style 78/1.45 AR Turbo - IN STOCK!
BorgWarner
$2,600.00Identical to the extremely popular 80/1.45 Cat Turbo, but with a Race Style compressor cover with v-band style outlet for easily installation and removal. Commonly used on Cat, Detroit Series 60, & Cummins ISX for BIG POWER builds...$2,600.00 -
Momentum Worx S410SX | V-Band Style 78/1.45 AR Turbo - IN STOCK!
Momentum Worx
$2,200.00Identical to the extremely popular 80/1.45 Cat Turbo, but with a Race Style compressor cover with v-band style outlet for easily installation and removal. Commonly used on Cat, Detroit Series 60, & Cummins ISX for BIG POWER builds...$2,200.00 -
BorgWarner | S410SX Turbo 78MM Super Core | Caterpillar C15, 3406, 6NZ, 5EK, MBN
BorgWarner
$2,200.00This is a turbo designated for usage on Single Turbo Caterpillar engines - C15 Acert, C15, 3406, MBN, 6NZ, 5EK, SDP, MXS, BXS, NSX Good for roughly 600HP depending on supporting mods. NO TURBINE HOUSING INCLUDED, but housing are...$2,200.00