null
Momentum Worx

*MOMENTUM WORX | Cummins ISX Turbo Conversion Kit

(1 review) Write a Review
SKU:
MMWX.ISXCONV
MPN:
MMWX.ISXCONV
  • *MOMENTUM WORX | Cummins ISX Turbo Conversion Kit
  • Optional Upgrade:  5" Down Pipe
  • Optional Upgrade:  4" Reduced Down Pipe
  • Optional Upgrade:  4" Straight Reducer
  • Optional Upgrade:  5" Straight Outlet
  • Optional Upgrade:  5" Down Pipe
  • Optional Upgrade:  4" Reduced Down Pipe
  • Optional Upgrade:  4" Straight Reducer
  • Optional Upgrade:  5" Straight Outlet
$1,700.00 - $3,775.00

Description

From the factory, ISX engines utilize a VGT (Variable Geometry Turbocharger).  The electronic actuator moves an externally mounted arm that can open and close the vanes in the turbine housing, thus varying the A/R size of the housing.  While this feature is great when working correcrtly, it often fails, rendering the truck inoperable. While replacement VGT turbos are available, they have become extremely costly to repair/replace.  An alternative to this VGT turbo is to utilize a fixed geometry turbocharger.   A fixed geometry turbocharger is a turbo that remains at the same constant A/R, in other words - its a regular old turbo!

This kit allows your to install a standard (fixed geometry) turbo on your ISX.   *REQUIRES ECU RE-CALIBRATION*  If installing on a stock truck, you will also need to use adapters or other modification to attach the exhaust, air filter system, and charge air cooler pipe.  We do offer exhaust adapters, see options below. 

If you are unclear what exactly this entails, we recommend checking out the link below:

READ ME::::::: ISX Turbo Kit FAQ

Additional parts may be required for your specific truck, please read the list of included components and contact us if you are unsure

 

Included Components:

1) Your Choice of Turbo

  • Momentum Worx S400
    • 75MM/1.32 (500HP Setup)
  • BorgWarner S400 (171702)
    • 75MM/1.32 (500HP Setup)
  • Momentum Worx Billet Wheel S475
    • 75MM/1.32  (550HP Setup)
  • Momentum Worx Billet S410SX
    • 78MM/1.32  (600HP+ Setup)
  • BorgWarner Billet S410SX 
    • 78MM/1.32 (600+HP Setup)

2) Turbo Manifold Adapter 

  • Bolts on to your stock exhaust manifold and allows you to bolt on a T6
  • Included new studs and nuts

3) Install Kit 

  • Turbo Oil Feed
  • Turbo Oil Drain Line
  • Turbo Oil Drain Line Bolts
  • V-Band Exhaust Clamp
  • Rubber Intake Elbow
  • T-Bolt Clamps For Intake Elbow
  • Turbo Elbow (Going to charge air cooler)
  • Turbo Elbow Clamp and O-ring
  • Actuator ORB plugs

_________

 

ONLY COMPATIABLE WITH FACTORY EXHAUST MANIFOLD.  If you are using an aftermarket manifold and looking for an installation kit, please use the links below. 

BD Diesel (104800) T6 Manifold Install Kit - CLICK HERE

Full Tilt Performance (88211) T6 Manifold Install Kit - CLICK HERE

 

***FOR OFF-ROAD, COMPETITION USE ONLY***

 

View AllClose

1 Review

  • 5
    Quality parts and insanely fast shipping

    Posted by Unknown on 23rd Jun 2020

    Ordered this Kit with the upgraded Exhaust manifold. Ordered on Wednesday and within Two days it was on my doorstep with everything listed and showed up in perfect condition. If you want to eliminate the VGT this kit is a Must have for The ISX engine! ... for off-road use only of course.

View AllClose