Momentum Worx
Install Kit for Full Tilt 88211 ISX Manifold
- SKU:
- UPC:
- MPN:
- 88211.1
MSRP:
Now:
$360.00
Was:
— You save
Description
If you are using the Full Tilt 88211 manifold to switch your Cummins ISX over to a T6 turbo, this kit has some accessories you will need when using a BorgWarner style T6 turbo.
Included In Kit
- Turbo V-Band Style Compressor Outlet Elbow
- Compressor Outlet V-Band Clamp
- V-Band Exhaust Clamp
- Rubber Intake Elbow
- T-Bolt Clamps For Intake Elbow
*Not compatible with Caterpillar style turbos, call us and we can build a special kit for Cat style turbos
Related Products

Full Tilt | Cummins ISX T6 Turbo Mount Ceramic Coated Exhaust Manifold
Full Tilt Performance
MSRP:
Now:
$2,340.00
Was:
For converting ISX to T6 Style Turbo
-Includes oil feed and drain lines, manifold bolts, turbo mounting studs, and gaskets.
Full Tilt Performance manifolds have been designed to improve on all...
FULL TILT | ISX CM871 Ceramic Coated Exhaust Manifold
Full Tilt Performance
MSRP:
Now:
$1,975.00
Was:
Full Tilt Performance manifolds have been designed to improve on all aspects over the manufacturers. All of our manifolds are cast out of a proprietary high quality blended steel, one of the hardest...
FULL TILT | ISX CM870 Ceramic Coated Exhaust Manifold
Full Tilt Performance
MSRP:
Now:
$1,975.00
Was:
Full Tilt Performance manifolds have been designed to improve on all aspects over the manufacturers. All of our manifolds are cast out of a proprietary high quality blended steel, one of the hardest...
FULL TILT | ISX CM2250/ CM2350 Ceramic Coated Exhaust Manifold
Full Tilt Performance
MSRP:
Now:
$1,975.00
Was:
NOTE: Check the right end of your factory manifold for casting number. This manifold is for "5999" casting number.
Full Tilt Performance manifolds have been designed to improve...

Install Kit for BD Diesel ISX Manifold 1048008
Momentum Worx
MSRP:
Now:
$900.00
Was:
If you are using the BD Diesel 1048008 manifold to switch your Cummins ISX over to a T6 turbo, this kit has the oil lines and accessories you will need when using a BorgWarner style T6 turbo...
Customers Also Viewed


*MOMENTUM WORX | Cummins ISX Turbo Conversion Kit
Momentum Worx
MSRP:
Now:
$1,900.00 - $3,775.00
Was:
From the factory, ISX engines utilize a VGT (Variable Geometry Turbocharger). The electronic actuator moves an externally mounted arm that can open and close the vanes in the turbine housing,...

Full Tilt | Cummins ISX T6 Turbo Mount Ceramic Coated Exhaust Manifold
Full Tilt Performance
MSRP:
Now:
$2,340.00
Was:
For converting ISX to T6 Style Turbo
-Includes oil feed and drain lines, manifold bolts, turbo mounting studs, and gaskets.
Full Tilt Performance manifolds have been designed to improve on all...

Install Kit for BD Diesel ISX Manifold 1048008
Momentum Worx
MSRP:
Now:
$900.00
Was:
If you are using the BD Diesel 1048008 manifold to switch your Cummins ISX over to a T6 turbo, this kit has the oil lines and accessories you will need when using a BorgWarner style T6 turbo...


BD Diesel | Cummins ISX T6 Conversion Manifold
BD Diesel
MSRP:
Now:
$1,209.95
Was:
Manifold fits Cummins ISX Engines with T6 Turbocharger
Pulse exhaust flow directed to the dual volute T6 turbine improves turbo spooling response for quick clean power
Three piece thick walled...

Momentum Worx S410SX 78MM/1.32 AR Turbo (V-Band Outlet) | ASSEMBLED IN THE U.S.A. - IN STOCK!
Momentum Worx
MSRP:
Now:
$2,000.00
Was:
Good for roughly 600HP depending on supporting mods. This is a Non-Wastegated turbo with a small exhaust housing for faster spool up - allowing the truck to get into the power band much quicker...

* MOMENTUM WORX | Cummins ISX to BorgWarner S400 / T6 - Turbo Install Kit
Momentum Worx
MSRP:
Now:
$900.00
Was:
This installation kit has the necessary parts for mounting a T6 flange turbo onto a Cummins ISX Engine. For usage with S400, S410, S500 or any other T6 flange turbo.
Additional...


*MOMENTUM WORX | Caterpillar C15 Acert (BXS / MXS / NXS) Single Turbo Conversion Kit
Momentum Worx
MSRP:
Now:
$4,400.00 - $5,335.00
Was:
The simplest and most cost effect way to single turbo your CAT C15
*Assorted plumbing fabrication is required for air intake, charge air cooler, and exhaust. ECM Tune is highly recommended for...
11 Blade Billet Wheel S475 T6 Turbo | 75/96/1.32 A/R
Momentum Worx
MSRP:
Now:
$1,200.00
Was:
ASSEMBLED IN THE USA
-11 Blade Billet 75MM Compressor Wheel.
-1.32 A/R T6 Exhaust Housing, Full Marmon V-Band Outlet (We have clamps and down pipe adapters available)
-5" Turbo...

BorgWarner S410SX | V-Band Style Detroit/Cummins 78/1.32 Turbo - IN STOCK!
BorgWarner
MSRP:
Now:
$2,600.00
Was:
Identical to the extremely popular 14969880000 Cat turbo, but with a Race Style compressor cover with v-band style outlet for universal fitment. Commonly used on Detroit Series 60 and Cummins...
FULL TILT | ISX Signature 600 HX60/HX55 Ceramic Coated Exhaust Manifold
Full Tilt Performance
MSRP:
Now:
$1,975.00
Was:
Full Tilt Performance manifolds have been designed to improve on all aspects over the manufacturers. All of our manifolds are cast out of a proprietary high quality blended steel, one of the hardest...