Garrett G-Series G47-1550 | 76MM - 880547-5023S

(No reviews yet) Write a Review
  • Garrett G-Series G47-1550 | 76MM - 880547-5023S
  • Garrett G-Series G47-1550 | 76MM - 880547-5023S


The Garrett G-Series G47 is a great entry level ball bearing charger for a single turbo CAT, Detroit, or ISX. This turbo is small enough to be used on a virtually stock truck, but will spool up great considering its ball bearing.  The 76MM inducer will supply more then enough air for a stock or lightly modified truck.  This turbo would be a direct competitor for the BorgWarner S476-SXE, but with a higher flowing turbine wheel and ceramic ball bearing construction. 


Compressor Wheel: 76MM / 109MM

Turbine Wheel: 93MM / 88MM


• Outline interchangeable with GTX Gen II turbos
• Supports up to 1550 flywheel horsepower
• 76mm | comp ind | 109mm comp exd
• High flow, high efficiency GTX Gen II comp aero
• G-Series turbine wheel aero increases performance compared to GTX47 Gen II
• Flow: up to 20% more
• Spool: up to +9% (estimated by flow, efficiency, and inertia)
• One-piece lightweight aluminum center hsg/backplate
• Outlet length on T6 turbine hsg reduced 17mm compared to GTX to optimize weight reduction


*Exhaust housings not included


Available Exhaust Housings

Part Number A/R Turbine Inlet Turbine Outlet
761208-0075 0.96 T6 V-Band
761208-0076 1.08 T6 V-Band
761208-0077 1.23 T6 V-Band
761208-0078 1.39 T6 V-band
View AllClose