Description
For customers looking for a little extra from an 80/1.45, look no further! This turbo is recommend for single turbo Caterpillar engines running a larger cam and injector with a good file. Capable of 700+ HP. Direct fitment for T6 manifolds.
What makes this turbo special?
-Bullseye Power’s Triple Compression Technology TCT BatMoWheel compressor wheel combined with Bullseye Power’s exclusive Race Cover
-Hand crafted assembly right here in the USA
Specs | |
Compressor Side | Turbine Side |
-80MM Inducer | -96MMM Wheel |
-5.5" Inlet From Air Cleaners | -1.45 A/R T6 Housing |
-4.2" V-Band Compressor Outlet | -5.75" Full Marmon Exhaust Outlet |
If you would like a different size exhaust housing, please send an email to: Info@momentumworx.com to place your order.
BEARING HOUSING OPTIONS EXPLAINED:
Bullseye recommends are trucks use cast iron bearing housing.
S400 comes with a 270 Degree thrust bearing and the drain line mount is the same as Detroit, ISX, or any universal application
S410 comes with a 360 Degree thrust bearing and the drain line mount is in the correct orientation to use the CAT factory drain line
V-BAND STYLE ELBOW EXPLAINED:
This turbo utilizes a 4.2" V-Band Style Compressor discharge (outlet). Your factory cat elbow will NOT fit, you can add one of ours for an easy install, or use an older Detroit or ISX elbow if you prefer.