STEED SPEED
STEED SPEED | Cat C15 Single Turbo Manifold \ TWIN Waste Gated
- SKU:
- CATC15G
- UPC:
- MPN:
- CATC15G
MSRP:
Now:
$2,000.00
Was:
— You save
Description
This one is exclusive to Momentum Worx. We had Steed Speed take their ever popular 1 piece Caterpillar Single turbo manifold, but added TWIN wastegate ports. These are 2.5" v-band style wastegate ports. This manifolds give you the option to run 1, 2, or 0 wastegates (Just install plug plates in place for 0 or 1 gate). If you are looking for the ULTIMATE boost control setup, this is for you. This design is also more efficient for bypassing the high pressure turbo to feed the atmospheric turbo in a compound setup.
Related Products


STEED SPEED | Cat C15 Single Turbo Manifold - IN STOCK!
STEED SPEED
MSRP:
Now:
$1,575.00 - $1,675.00
Was:
A beautifully crafted CNC billet steel masterpiece! During testing, EGTs were lowered while spooling the turbo faster with higher peak boost and less drive pressure. This manifold is one piece so...

STEED SPEED | Cat C15 Acert Manifold - IN STOCK!
STEED SPEED
MSRP:
Now:
$1,575.00 - $1,675.00
Was:
A beautifully crafted CNC billet steel masterpiece! During testing, EGTs were lowered while spooling the turbo faster with higher peak boost and less drive pressure.
Fits all C15 Acerts...

CAT C15 3406E + C15/C16 Single Turbo Manifold & Turbo Gaskets
Momentum Worx
MSRP:
Now:
$100.00
Was:
Caterpillar Exhaust Manifold, Turbo, and Oil Line Gaskets for 3406C, 3406E, & C15 Single Turbo and C16. 6NZ, 5EK, 1MM, MBN and more.
(6) Exhaust manifold gaskets
(1) Turbo T6...

CAT C15 Acert Manifold Gaskets + Turbo Gasket
Momentum Worx
MSRP:
Now:
$135.00
Was:
Need manifold & turbo gaskets for you BXS, MXS, NXS, or SDP C15 acert? Check these out!
Includes:
(6) Manifold Gaskets
(1) High Pressure Turbo Gasket
(2) Oil Drain Line...

ARP Stainless Turbo Stud Kit for Steed Speed C15 Manifolds
Momentum Worx
MSRP:
Now:
$100.00
Was:
ARP Stainless Turbo Studs, Nuts, & Washers for Steed Speed Cat C15 & Cat C15 Acert Exhaust Manifolds.
*Does NOT fit older through-bolt design manifolds, only to be used with...
Customers Also Viewed

EPP | Stainless 1 Piece CAT Single Turbo Manifold
Enhanced Power Products
MSRP:
Now:
$1,800.00
Was:
Enhanced Power Products Caterpillar exhaust manifold. There's a few things that make this particular Cat 3406 / C15 manifold unique from others on the market.
1. Stainless Steel 1 Piece...


BorgWarner; S400/S471 | 171701 | Detroit Series 60 Turbo - IN STOCK!
BorgWarner
MSRP:
Now:
$1,000.00
Was:
This is a new Genuine Borg Warner Turbocharger. We have provided a few part numbers below that cross over to this turbocharger; this unit will fit many Detroit engines along...


STEED SPEED | Cat C15 Single Turbo Manifold - IN STOCK!
STEED SPEED
MSRP:
Now:
$1,575.00 - $1,675.00
Was:
A beautifully crafted CNC billet steel masterpiece! During testing, EGTs were lowered while spooling the turbo faster with higher peak boost and less drive pressure. This manifold is one piece so...

ARP Stainless Turbo Stud Kit for Steed Speed C15 Manifolds
Momentum Worx
MSRP:
Now:
$100.00
Was:
ARP Stainless Turbo Studs, Nuts, & Washers for Steed Speed Cat C15 & Cat C15 Acert Exhaust Manifolds.
*Does NOT fit older through-bolt design manifolds, only to be used with...


*MOMENTUM WORX | Caterpillar C15 Acert (BXS / MXS / NXS) Single Turbo Conversion Kit
Momentum Worx
MSRP:
Now:
$4,400.00 - $5,335.00
Was:
The simplest and most cost effect way to single turbo your CAT C15
*Assorted plumbing fabrication is required for air intake, charge air cooler, and exhaust. ECM Tune is highly recommended for...
FULL TILT | CAT C15 / 3406 Ceramic Coated Exhaust Manifold (Peterbilt & Kenworth)
Full Tilt Performance
MSRP:
Now:
$1,975.00
Was:
Full Tilt Performance manifolds have been designed to improve on all aspects over the manufacturers. All of our manifolds are cast out of a proprietary high quality blended steel, one of the hardest...


Mack MP7 & MP8 Aftermarket VGT Turbo / HE431VE | 4031206
Momentum Worx
MSRP:
Now:
$2,800.00
Was:
Lets face it, replacement VGT turbos are EXPENSIVE! The OEM releases many variations, making is confusing and difficult to know if you are getting the correct turbo for YOUR ENGINE. ...


Cummins ISM Turbo | HE431V - 4955462
Momentum Worx
MSRP:
Now:
$1,800.00
Was:
This is a new aftermarket replacement turbocharger for Cummins ISM engines. To ensure direct fit on your specific engine, please be sure to find your part number in the cross reference below...

Stainless FullTilt Manifold Mounting Spacers | CAT 3406 / C15
Full Tilt Performance
MSRP:
Now:
$265.00
Was:
Looking for spacers to complement your stainless studs? Look no further!


Cummins X15 HE400VG Turbo - IN STOCK!
Momentum Worx
MSRP:
Now:
$2,800.00
Was:
If you need a new turbo for a Cummins X15, you may have been stuck with sticker shock by the dealer, we have your solution! Brand new aftermarket turbocharger for fitment on Cummins X15 Engines...