Full Tilt Performance
Stainless Manifold Mounting Spacers | Cummins ISX
- SKU:
- 101017
- UPC:
- MPN:
- 36100
MSRP:
Now:
$265.00
Was:
— You save
Description
The finishing bling blaow for any Cummins ISX manifold install.
(12) Stainless Manifold Spacers
Related Products


BD Diesel | Cummins ISX T6 Conversion Manifold
BD Diesel
MSRP:
Now:
$1,209.95
Was:
Manifold fits Cummins ISX Engines with T6 Turbocharger
Pulse exhaust flow directed to the dual volute T6 turbine improves turbo spooling response for quick clean power
Three piece thick walled...

Full Tilt | Cummins ISX T6 Turbo Mount Ceramic Coated Exhaust Manifold
Full Tilt Performance
MSRP:
Now:
$2,340.00
Was:
For converting ISX to T6 Style Turbo
-Includes oil feed and drain lines, manifold bolts, turbo mounting studs, and gaskets.
Full Tilt Performance manifolds have been designed to improve on all...

Stainless FullTilt Manifold Mounting Spacers | CAT 3406 / C15
Full Tilt Performance
MSRP:
Now:
$265.00
Was:
Looking for spacers to complement your stainless studs? Look no further!


Cummins ISX/X15 Exhaust Manifold Gaskets
Momentum Worx
MSRP:
Now:
$100.00
Was:
Looking to replace the manifold gaskets on your Cummins ISX engine? Look no further! Multi-layer metal gaskets.

Stainless Manifold Mounting Spacers | Detroit Series 60
Full Tilt Performance
MSRP:
Now:
$265.00
Was:
The finishing bling blaow for any Detroit Series 60 manifold install.
(12) Stainless Manifold Spacers
Customers Also Viewed


*MOMENTUM WORX | Cummins ISX Turbo Conversion Kit
Momentum Worx
MSRP:
Now:
$1,900.00 - $3,775.00
Was:
From the factory, ISX engines utilize a VGT (Variable Geometry Turbocharger). The electronic actuator moves an externally mounted arm that can open and close the vanes in the turbine housing,...


Momentum Worx | Cummins ISX Signature 600 Turbo Kit
Momentum Worx
MSRP:
Now:
$6,200.00
Was:
The name "Signature 600" is famous for being one of the most coveted engines in the Cummins linage. This motor was built before modern emissions equipment, but still had electronic fuel control...


Momentum Worx S410SX Cat Turbo | 78MM / 1.32 A/R Wastegated
Momentum Worx
MSRP:
Now:
$2,000.00
Was:
We took our most popular bolt on upgrade for Caterpillar 3406E and Caterpillar C15 Engines. (6NZ, 5EK, 1LW, etc), and added wastegate :)
This turbo serves a few potential customers:
1) The...


BorgWarner S410SX | V-Band Style 78/1.45 AR Turbo - IN STOCK!
BorgWarner
MSRP:
Now:
$2,600.00
Was:
Identical to the extremely popular 80/1.45 Cat Turbo, but with a Race Style compressor cover with v-band style outlet for easily installation and removal. Commonly used on Cat, Detroit Series...
FULL TILT | ISX CM871 Ceramic Coated Exhaust Manifold
Full Tilt Performance
MSRP:
Now:
$1,975.00
Was:
Full Tilt Performance manifolds have been designed to improve on all aspects over the manufacturers. All of our manifolds are cast out of a proprietary high quality blended steel, one of the hardest...

Stainless Manifold Mounting Spacers | Detroit Series 60
Full Tilt Performance
MSRP:
Now:
$265.00
Was:
The finishing bling blaow for any Detroit Series 60 manifold install.
(12) Stainless Manifold Spacers


Momentum Worx S410SX | V-Band Style 78/1.45 AR Turbo - IN STOCK!
Momentum Worx
MSRP:
Now:
$2,200.00
Was:
Identical to the extremely popular 80/1.45 Cat Turbo, but with a Race Style compressor cover with v-band style outlet for easily installation and removal. Commonly used on Cat, Detroit Series...


Momentum Worx | S410SX Turbo 78MM Super Core V-Band Outlet - IN STOCK!
Momentum Worx
MSRP:
Now:
$1,800.00
Was:
Momentum Worx S410SX Supercore. This is a race style v-band outlet compressor cover. Fitment for converted cat, detroit, and ISX. Must be used with 96MM turbine wheel housing...


ARP Stainless Turbo Studs for Cat Full Tilt Manifolds
Full Tilt Performance
MSRP:
Now:
$125.00
Was:
Replacement turbo studs for Full Tilt Performance Caterpillar Single Turbo manifolds (88002 & 88000)
FullTilt Part Number: 35001
Includes:
-(4) Stainless Studs
-(4) Washers
-(4)...


5" Exhaust Outlet for S400/S410 Turbo
Momentum Worx
MSRP:
Now:
$75.00
Was:
This exhaust adapter fits S400/S410 turbos with marmon style exhaust flanges. This down pipe comes off the turbo ends in 5" diameter for easy fabrication into your existing exhaust system...