*MOMENTUM WORX | Caterpillar C13 Acert Single Turbo Conversion Kit (KCB)

Momentum Worx is the premier supplier of single turbo kits for Caterpillar engines.  The CAT C13 Acert comes from the factory with compound Garrett Turbochargers.  While this system is very efficient, its very complex;  2 turbos, countless bellows, additional air to water cores, etc.  This apparatus also makes working on that side of the engine a chore, and even simple jobs are an all day affair. By switching to single turbo, you simply the turbo system and also make servicing that side of the engine much more simple. 

Why SHOULD you consider switching to a single turbo?

If you are in a position where one or both of your turbos is damaged or worn out, your manifold is cracked, or you are having issues with bellows failing.  Any of those situations would be a good time to consider a single turbo conversion.  The single turbo system is far simpler in regards to maintenance and operation.  The drawback is that the powerband will become slightly more narrow.

Why SHOULDNT you consider switching to a single turbo?

If you have good running compounds and no current issues with your manifold or bellows, there is no logical reason to remove them just to single out the truck. 

*ECM Programming Recommended, fitment may vary slightly based on your truck configuration 

*Fitment is only for KCB Engine Serial Number, not compatible with LEE

*DOES NOT INCLUDE AIR PIPING OR EXHAUST PIPING.  We include everything to convert your engine, but not the items connected to the truck (CAC pipe, Air Cleaner Pipe, Exhaust Pipe)

Kit Includes:

Garrett GT4294 Turbocharger

• 71MM Inducer
• Divided T6 Gated Housing

Momentum Worx 1 Piece Manifold 

• Stainless Steel Construction
• Made in the USA
• Ceramic Coated

 Installation Kit

• Oil feed and drain lines
• Gaskets for manifold and turbo
• Intake elbow coupler for turbo
• Compressor Outlet Elbow
• Exhaust adapter and bellows
• Plugs, Plates, O-Rings

**Turbo kits are not eligible for return

*** TURBO KITS SHIP FLAT RATE via UPS GROUND FOR $150, if you add other items to your cart and select expedited shipping, it only applies to the additional items, not the turbo kit. 

Outside of the kit, you will need the following items to complete installation

1) Exhaust Piping - We include the marmon clamp needed for the turbo and we offer exhaust pipe options at the link below, but your factory exhaust pipe will need to be modified to work with the single turbo flange. 

https://momentumworx.com/accessories/down-pipes-and-flanges/

2) Air Cleaner Piping - We include a 6" ID 90 degree elbow coming off the turbo, you are responsible for adding piping to connect your factory air cleaner system.  We do sell air cleaner piping and couplers, see link below.

https://momentumworx.com/accessories/rubber-intake-elbows/

3) Charge Air Cooler Pipe - We provide a 4" OD 90 degree elbow coming off the turbo, you are responsible for connecting this to your factory charge air cooler.  We do offer CAC pipes for a few models, link below.

https://momentumworx.com/accessories/charge-air-cooler-pipes/