*MOMENTUM WORX | Caterpillar C15 Acert (BXS / MXS / NXS) Single Turbo Conversion Kit

The simplest and most cost effect way to single turbo your CAT C15

*Assorted plumbing fabrication is required for air intake, charge air cooler, and exhaust.  ECM Tune is highly recommended for best performance. 

Kit Includes:

Your Choice of S410SX Turbocharger

-Momentum Worx S410SX 78MM (Manufactured by ZEKIturbo)

-BorgWarner S410SX 78MM

• Turbo Specs for ALL Options -
• Dimensions:
• Comp. Wheel: 105MM
• Inducer: 78MM
• Turbine Wheel: 96MM
• A/R: 1.32 Non Waste Gated

Full Tilt Performance Exhaust Manifold

• Ceramic Coated to reduces heat and improve air velocity
• Hand Port & Polished for optimal flow
• Beefed Up design to prevent cracking or leaking at the joints (Press Fit)

 Installation Kit

• Oil feed and drain lines
• Gaskets for manifold, turbo, and oil lines
• Rubber intake elbow coupler for front of turbo
• T-Bolt clamps for rubber boots
• Cast compressor outlet elbow kit
• Oil drain adapter
• Oil drain Plate
• Exhaust clamp

For a complete installation, you will need to add your own exhaust down pipe and charge air cooler pipe, and some air cleaner piping. 

Does NOT Fit SDP Serial Prefix engines. 

**Turbo kits are not eligible for return

*** TURBO KITS SHIP FLAT RATE via UPS GROUND FOR $150, if you add other items to your cart and select expedited shipping, it only applies to the additional items, not the turbo kit. 

Outside of the kit, you will need the following items to complete installation

1) Exhaust Piping - We include the marmon clamp needed for the turbo and we offer exhaust pipe options at the link below, but your factory exhaust pipe will need to be modified to work with the single turbo flange. 

https://momentumworx.com/accessories/down-pipes-and-flanges/

2) Air Cleaner Piping - We include a 6" ID 90 degree elbow coming off the turbo, you are responsible for adding piping to connect your factory air cleaner system.  We do sell air cleaner piping and couplers, see link below.

https://momentumworx.com/accessories/rubber-intake-elbows/

3) Charge Air Cooler Pipe - We provide a 4" OD 90 degree elbow coming off the turbo, you are responsible for connecting this to your factory charge air cooler.  We do offer CAC pipes for a few models, link below.

https://momentumworx.com/accessories/charge-air-cooler-pipes/