BorgWarner
BorgWarner S410SX / S400 Rebuild Kit With 360 Degree Thrust Bearing
- SKU:
- 14007110003
- MPN:
- 14007110003
Description
Genuine BorgWarner rebuild kit for S400/S410SX Turbochargers. Includes thrust bearing, Thrust Collar Journal Bearings, Piston Ring Seals and more.
1 Review
-
Just the right parts I needed
Super company to work with and I got quick shipping
Related Products
BorgWarner S500SX / S500 Turbo Rebuild Kit With 360 Degree Thrust Bearing
BorgWarner
$265.00
Genuine BorgWarner rebuild kit for S500 Turbochargers. Includes thrust bearing, Thrust Collar Journal Bearings, Piston Ring Seals and more.
Fitment for:
S500SX, S500SXE, S588, S591,...
S400 / S410SX CHRA Clamp for Turbine Housing | BorgWarner 132681
BorgWarner
$35.00
BorgWarner 13268 Clamp
Fits S400 & S410SX turbochargers. This clamp holds the exhaust housing to the bearing housing. Nut NOT included
BorgWarner | S400/S410SX T6 Exhaust Housing | 1.58 A/R - IN STOCK
BorgWarner
$425.00
Non Wastegated 1.58 A/R Exhaust Housing for BorgWarner S410SX/S475/S473/S478/S400 Turbochargers with 96MM Turbine...
USED - BorgWarner S410SX Bearing Housing | 1405 151 0000
$250.00
USED BorgWarner bearing housing for S410SX turbo. Fitment for 14969880000, 14969880001, 14969880001, 14969880002, 14969880003. 14969880004, 14969880005
ISX BorgWarner S400 Style V-Band 90 Degree Turbo Elbow Kit
Momentum Worx
$150.00
This clamp is a direct bolt on for most BorgWarner S400 style turbos. Commonly used when converting ISX to BW turbo, or C13 Acert to single turbo.
Fits S400, S410, S500 v-band outlet...
ISX BorgWarner S400 Style V-Band 45 Degree Turbo Elbow Kit
Full Tilt Performance
$200.00
This clamp is a direct bolt on for most BorgWarner S400 style turbos. Commonly used when converting ISX to BW turbo, or C13 Acert to single turbo.
Fits the following...
S500 Turbo Installation Kit (Converting S400/S410SX Turbo)
Momentum Worx
$390.00
When swapping out to an S500 from an S400 or S410SX, you will need to adapt some of your connections in order to install the turbo. The S500 bearing housing uses the same size/pitch oil drain...
USED | S400/S410SX 1.45 A/R Exhaust Housing
Aftermarket 1.45 A/R T6 exhaust housing. Fitment for all S400 and S410SX turbos with 96/88MM turbine wheel.
S400 / S410SX 5" Full Marmon Exhaust Clamp
Momentum Worx
$35.00
Full Marmon V-band exhaust clamp for S400 / S410SX turbos. This clamp holds the down pipe to the back of the turbo.
5" ID
5.75" OD