Rubber Intake Elbows
Momentum Worx carries a full line of rubber intake elbows! From 5" through 7", 90 Degree, 45 Degree, reducers and more. Commonly used on Peterbilt and Kenworth trucks when swapping out to different turbos.
-
Intake Piping; 6" Diameter Air Cleaner Pipe 24" Length
Momentum Worx
$100.006" OD Diameter Air Cleaner Piping for commercial diesel engines. 24" Length. Raw aluminum finish$100.00 -
Intake Elbow; 5.0"/5.5" Reducer 90 Degree Rubber Elbow
Momentum Worx
$100.00This is a 90 Degree reducer elbow for use on the air cleaner intake system. 5" ID on one side 5.5" ID on the other side$100.00 -
Intake Elbow; 6" 90 Degree Rubber Elbow
Momentum Worx
$100.00This is a 90 Degree reducer elbow for use on the air cleaner intake system. 6" ID On Both Sides$100.00 -
$80.00 -
Intake Piping; 6" Diameter Air Cleaner Pipe Union 4" Length
Momentum Worx
$25.006" OD Diameter Air Cleaner Piping for commercial diesel engines. 4" Length. Raw aluminum finish$25.00 -
Intake Elbow; 5.0"/6" Reducer 90 Degree Rubber Elbow
Momentum Worx
$100.00This is a 90 Degree reducer elbow for use on the air cleaner intake system. 5" ID on one side 6" ID on the other side$100.00 -
Intake Elbow; 5.5" 90 Degree Rubber Elbow
Momentum Worx
$100.00This is a 90 Degree elbow for use on the air cleaner intake system. 5.5" ID on both sides$100.00 -
$70.00 -
Intake Elbow; 6"/5.5" Reducer 90 Degree Rubber Elbow
Momentum Worx
$100.00This is a 90 Degree reducer elbow for use on the air cleaner intake system. 6" ID on one side 5.5" ID on the other side$100.00 -
Intake Reducer; 6" to 5"
Momentum Worx
$50.00Rubber intake reducer collar, slides into an existing rubber elbow to reduce the size down to the correct connection. Commonly used on CAT engines to reduce the air cleaner piping to the 5" intake on S400 turbos 6.0" ID reduced to 5.0" ID$50.00 -
Intake Piping; 5.5" Diameter Air Cleaner Pipe Union 6" Length
Momentum Worx
$55.005.5" OD Diameter Air Cleaner Piping for commercial diesel engines. 6" Length. Raw aluminum finish$55.00 -
Intake Elbow; 6" ID 45 Degree Rubber Elbow
Momentum Worx
$100.00This is a 45 Degree reducer elbow for use on the air cleaner intake system. 6" ID on both ends$100.00 -
Intake Reducer; 5.5" to 5"
Momentum Worx
$50.00Rubber intake reducer collar, slides into an existing rubber elbow to reduce the size down to the correct connection. Commonly used on ISX engines to reduce factory piping to an S400 turbo inlet. 5.5" ID reduced to 5.0" ID$50.00 -
Intake Reducer; 6" to 5.5"
Momentum Worx
$50.00Rubber intake reducer collar, slides into an existing rubber elbow to reduce the size down to the correct connection. Commonly used on CAT engines to reduce the air cleaner piping to the 5.5" intake on S410SX race compressor covers...$50.00 -
Intake Elbow; 7" to 6" Reducer 90 Degree Rubber Elbow
Momentum Worx
$150.00This is a 90 Degree reducer elbow for use on the air cleaner intake system. 6" ID on one side 7" ID on the other side$150.00