Cummins N14 Turbo Upgrade
The factory HT60 on the Cummins N14 engine has a unique flange pattern and abnormal mounting orientation that makes it very difficult to retrofit a more modern upgraded turbocharger.
With this in mind, we set out to create an upgrade that was a direct replacement from an installation stand point.
Depending on the original spec and horsepower out put, your N14 could have had a multitude of different chargers from the factory, we have listed them below.
As you can see above, our N14 upgraded turbo has a 2MM Larger Compressor Wheel Inducer and 7MM Larger Turbine Wheel Exducer over the largest stock N14 turbo. This makes for a great upgrade over the stock turbo. Add a little fuel and you will certainly have a little more pulling power!
Looking to purchase one? Check them out here!
https://momentumworx.com/momentum-worx-cummins-n14...
Recent Posts
-
The History of CAT 3406E Engines: A Milestone in Diesel Power
The CAT 3406E engine is one of the most iconic diesel engines ever produced by Caterpillar Inc., kno …26th Jun 2025 -
Local Entrepreneur Boosts Diesel Performance Industry with Turbocharger Sales
[Lansdale, Pennsylvania] — In the heart of diesel country, a local entrepreneur is making wave …26th Jun 2025 -
1.32 A/R, 1.45 A/R, or 1.58 A/R - Which one do you have on YOUR Turbo?
The BorgWarner S400 and S410SX turbos are SUPER popular for CAT, Cummins, and Detroit trucks. …11th Jul 2024